Genie GTH™ -1056
| Standard Features |
|
Measurements •10,000 lb (4,536 kg) maximum lift capacity •56 ft 10 in (17.32 m) maximum lift height •42 ft (12.80 m) maximum reach Productivity •Full time 4WD •4WS •Operator selectable front, crab, coordinated steering modes •Frame leveling 10° side to side •4-speed forward and reverse powershift transmission •Power assisted steering •Inboard wet disc service brakes •Wet disc spring applied parking brake •14 x 28 in 12-ply air-filled rough terrain tires •Front axle differential lock •Rear axle stabilization system •Twin axle mounted stabilizers •High efficiency/variable displacement hydraulic pump •ROPS/FOPS canopy •Single, multi-function, proportional joystick •Machine level indicator •Full gauge cluster with engine diagnostics •Boom angle indicator •Retractable 3 in (7.6 cm) seatbelt •Left front and rear tire fenders •Reverse motion alarm •Adjustable suspension seat •Auxiliary hydraulic circuit (15 GPM) •Genie manual Quick-Attach™ system •Fenders (set of 4) •Lift Shackle at boom tip |
| Options & Accessories |
|
Productivity •Fully enclosed cab (includes full glass, defroster, wiper, washer, right-side sliding window, split door) •Fully enclosed cab air conditioning •Front and top glass •Right-side screen •Flashing beacon •Work lights (High output LED cab, boom and rear) •Road lights (High output LED 2 front mounted, 1 backup, 2 rear stop/turn/tail) •Fire extinguisher •Rear proximity alarm Engine Options •Deutz TCD 3.6 L Tier 4f 121 HP (90.23 kW)* •Engine block heater Tire Options •14 x 28 in 12-ply foam-filled rough terrain tires •14 x 24 in Solid Rubber Tires Attachment Options •Carriages - Quick-Attach™ -60 in (1.52 m) rotating carriage (10° from center left and right) -48 in (1.22 m) rotating carriage (10° from center left and right) -72 in (1.83 m) swing carriage (45° from center left and right) -60 in (1.52 m) wide fork carriage -72 in (1.83 m) wide fork carriage •Forks -60 in (1.52 m) pallet forks (set of two) 2.25x 4 x 60 in (.06 x .10 x 1.52 m) -72 in (1.83 m) pallet forks (set of two) 2.25x 4 x 72 in (.06 x .10 x 1.83 m) |
|
Model |
GTH™-1056 | |
|
Measurements |
US |
Metric |
|
Maximum lift height |
56 ft 10 in |
17.32 m |
|
Maximum forward reach |
42 ft |
12.80 m |
|
A Height, stowed |
8 ft 6 in |
2.59 m |
|
B Length, stowed (without forks) |
22 ft |
6.71 m |
|
Width |
8 ft 6 in |
2.59 m |
|
C Wheelbase |
10 ft 8 in |
3.25 m |
|
D Ground clearance, center |
1 ft 10 in |
0.56 m |
|
E Ground clearance, axle |
1 ft 6 in |
0.46 m |
|
Fork cross section |
2.25 x 4 in |
57 x 101 mm |
|
Productivity | ||
|
Maximum lift capacity |
10,000 lbs |
4,536 kg |
|
Lift capacity at maximum height |
4,000 lbs |
1,814 kg |
|
Lift capacity at maximum reach |
3,000 lbs |
1,361 kg |
|
Raise/Lower boom |
13.5/12 sec |
|
|
Extend/Retract |
16/15 sec |
|
|
Frame leveling |
10° side to side |
|
|
Drive speed |
19 mph |
|
|
Draw bar pull |
28,800 lbs |
13,063 kg |
|
Turning radius, outside (4WS) |
13 ft 3 in |
4.04 m |
|
Auxiliary hydraulic flow |
2-15 gpm |
7.6-56.8 lpm |
|
Auxiliary hydraulic pressure |
3,200 psi |
220 bar |
|
Tires, standard size |
14 x 28 in, 12 ply |
|
|
Power | ||
|
Power source |
Deutz TCD 3.6 L Tier 4f 121 HP (90.23 kW)* | |
|
Electrical system |
System voltage 12 volt |
|
|
|
Alternator 95 amp |
|
|
|
Battery 1000 CCA at 0˚F (-18˚C) | |
|
Hydraulic tank capacity |
44 gal |
166.6 L |
|
Hydraulic system capacity (w/tank) |
55 gal |
208.2 L |
|
Fuel tank capacity |
35 gal |
132.5 L |
|
Weight*** | ||
|
|
30,000 lbs |
13,608 kg |
Documents
gth-1056_spec_2019.pdf| Monday - Friday | 7:30AM - 5:00PM |
| Saturday | Closed |
| Sunday | Closed |
Quick Links
Available Hours
Location
