Yale High Capacity Forklift Trucks

Specifications

Description

The GP190-280DF is designed for heavy-duty operating conditions in produce, paper, forest products, metals and concrete.

In heavy duty applications, you need a lift truck with the power to get through the toughest challenges while avoiding high running costs.

Cummins turbo diesel engine pairs with ZF WG 161 transmission, optimized for maximum performance and fuel economy
The Tier 4 Final after-treatment package offers cooled Exhaust Gas Recirculation (EGR), a Selective Catalytic Reduction system (SCR) for NOx reduction, a Diesel Oxidation Catalyst (DOC) for Particulate Matter (PM) removal, and a Diesel Exhaust Fluid (DEF) dosing module
ECO Modes control maximum engine RPM and throttle response for balance of performance and fuel savings
On-demand hydraulic system can result in 10% lower fuel consumption - $2,250 per year at $2.50/gal
Empty seat engine shutdown turns off the truck when the operator is out of the seat for a selectable 3-15 minute window, limiting idle hours on the truck
On-demand cooling uses viscous drive cooling fan that draws power only when cooling is required - unlike a direct drive fan

The GP-DF series is designed to keep operators comfortable and focused, for lasting productivity.

Low step heights for easy entry and exit
Low noise thanks to vibration dampeners for the powertrain
High, open carriage and mast sections offer unobstructed view of fork tips
Optional foot directional control pedal for quicker, smoother control of travel direction
Optional Accutouch mini-lever e-hydraulic controls accompany the adjustable armrest for low-effort, fingertip control of hydraulic functions and horn

The GP-DF series delivers the performance you need to meet the highest performance benchmarks in tough duty cycles.

Automatic throttle up provides automatic response to lift inputs from the operator when the lift lever is activated, with a controlled rev-up to keep the engine in the most efficient operating range
Maximum travel speed of 18 mph, with load present
Fast lifting speeds of 79 ft/min, with or without load present
Lowering speeds of 98 ft / min with load present

The GP-DF series offers the build quality, smart features and serviceability to keep performing, shift after shift.

Sideways tilting cab offers unobstructed access to the engine and key components
CAN bus connections help to reduce fault identification time
Longer service intervals increase uptime and reduce service costs. LSH oil change is up to 6,000 hours, transmission oil change interval is 2,000 hours.
Sturdy mast design with less deflection than comparable overhead tilt products
Engine protection system monitors coolant, air intake temperatures and oil pressure
Transmission system monitors pressure, temperature and forward/reverse lockout during changes in direction
Efficient hydraulic system does not require engine speeds to run as high to extend component life
Quad-cooler radiator design channels only cool air, not preheated air, across cores

MODELS AND SPECIFICATIONS

Model	Load Capacity	Load Centre	Lift Height	Turning Radius	Overall Width	Weight	Engine Type	Transmission
GP210DF	21000lbs	24	216	154.6	97	28478	Cummims QSB 4.5L Diesel	ZF WG161
GP250DF	25000lbs	24	275	161.9	97	31621	Cummims QSB 4.5L Diesel	ZF WG161
GP190DF	19000lbs	24	216	154.6	97	28167	Cummims QSB 4.5L Diesel	ZF WG161
GP230DF	23000lbs	24	275	161.9	97	31770	Cummims QSB 4.5L Diesel	ZF WG161
GP230SDF	23000lbs	24	275	154.6	97	30767	Cummims QSB 4.5L Diesel	ZF WG161
GP280DF	28000lbs	24	275	161.9	97	33534	Cummims QSB 4.5L Diesel	ZF WG161

INDUSTRY SECTORS

- Lumber
- Concrete
- Steel, Aluminum & Metals
- Mining, Energy & Construction

LITERATURE

Name	Link
GDP190-280DF Spec Sheet.pdf	Download